Dock Fender DF 110/10 – Solid Boat Fender for Docks, Pontoons & Marinas

The seaEQ Dock Fender DF 110/10 is a permanently mounted protection fender for docks, pontoons and marina berths. It is securely fixed to the dock structure and reliably protects boats while docking and when lying alongside – making it an effective boat fender for dockside protection (not a hanging fender attached to the boat).

Application: Fixed Protection Fender for Docks

The DF 110/10 is designed for installation on concrete and wooden docks and is suitable for private berths as well as marinas. Its fixed installation creates a permanent protective surface along the dock or pontoon.

Gliding Contact Instead of Abrupt Stopping

A key functional feature of the DF 110/10 is its controlled gliding behaviour. When the boat comes into contact with the fender, it is not stopped abruptly but can glide along the surface. This helps the boat remain manoeuvrable, reduces contact forces and protects the hull – particularly when docking in crosswinds or when there is movement within the marina.

Reliable Protection During Continuous Dock Contact

Permanently mounted to the dock, the DF 110/10 provides a consistent protective surface along the edge of the berth. It effectively reduces scratches, impacts and abrasion that can occur while docking or as water levels change. The dock fender is designed for permanent outdoor use and provides reliable protection over long periods.

Material & Construction

The Dock Fender DF 110/10 is made from closed-cell polyethylene foam with a durable synthetic-fibre covering. The rear is made from heavy-duty PVC and prepared for screw mounting to the dock. This construction provides dimensional stability, high durability and a long service life in marine environments.

Secure Screw-Mounted Installation

The DF 110/10 is securely attached to the dock by screws. Circumferential webbing straps cover the mounting points, protecting both the fasteners and the boat hull.

Two optional mounting kits are available as accessories, providing a secure and clean installation.

DF Series – Available Variants

The DF 110/10 is the reference model within the DF series. Other versions differ in length, design or coverage and can be selected or combined depending on the dock configuration, berth and required level of protection:

• DF 40/10 – short version
• DF 80/10 – medium version
• DF 110/10 – standard length
• DF A 20/10 – corner version
• DF B 110/20 – bow version
• DF M 110/50 – mat version

Dimensions

Fender:
DF 110/10: approx. 1100 × 100 × 40 mm (length × height × thickness)

Mounting plate:
approx. 1165 × 165 mm (length × height)

Note:
The mounting plate of the DF series is 65 mm larger than the fender dimensions in both length and height. This applies to all variants of the DF series.

Colours

black · blue · grey

Care & Cleaning

The dock fender can easily be washed with water and, if required, cleaned using a pressure washer from an appropriate distance. Weathering and UV exposure may cause the colour intensity to decrease over the years. This has no effect on the function or protective performance of the dock fender.

Origin & Quality

seaEQ dock fenders of the DF series are manufactured in Germany. The materials used are sourced from Europe and selected for long-term use on docks, pontoons and marina facilities.

Frequently Asked Questions (FAQ)

Is the DF 110/10 a boat fender or a dock fender?

The DF 110/10 is a dock fender that is permanently mounted to a dock or pontoon. It can therefore also be considered a dock-mounted boat fender, as it protects the boat while docking and lying alongside.

What is the DF 110/10 designed for?

It is designed for the permanent protection of boats at docks, pontoons and marina berths – particularly where regular contact occurs at the berth.

What does “gliding contact” mean with the DF 110/10?

When the boat comes into contact with the fender, it is not stopped abruptly but can glide along the fender surface. This reduces contact forces and helps protect the hull.

How is the dock fender installed?

The DF 110/10 is securely screw-mounted to the dock. Circumferential webbing straps cover the mounting points.

Are mounting kits available?

Yes. Two optional mounting kits are available as accessories.

What are the dimensions of the DF 110/10?

Fender: approx. 1100 × 100 × 40 mm. Mounting plate: approx. 1165 × 165 mm.

Which colours are available?

black, blue, grey

Where is the DF 110/10 manufactured?

seaEQ dock fenders of the DF series are manufactured in Germany using materials sourced from Europe.