Dock Fender DF 110/10 – fixed dock fender for marinas, piers and pontoons

Fixed dock fender for permanent installation

The seaEQ Dock Fender DF 110/10 is a fixed protection fender designed for docks, piers and pontoons. It is permanently mounted to the dock infrastructure and protects boats during berthing and while lying alongside. The DF 110/10 is suitable for concrete and wooden docks in private berths and marinas.

Controlled sliding contact instead of abrupt stopping

A key functional feature of the DF 110/10 is its controlled sliding behaviour. The boat is not abruptly stopped on contact but guided smoothly along the fender surface. This keeps the boat manoeuvrable and significantly reduces impact forces, especially during side berthing or crosswind conditions.

Reliable protection for continuous dock contact

Thanks to its fixed installation, the DF 110/10 forms a permanent protective surface along the dock edge. Scratches, impacts and abrasion caused by berthing or changing water levels are effectively reduced. The dock fender is designed for continuous, long-term use.

Robust construction for marina operation

The DF 110/10 features a closed-cell polyethylene foam damper with a durable textile outer layer. The rear side is made of heavy-duty PVC and prepared for screw mounting. This construction ensures dimensional stability, high durability and a long service life in marine environments.

Mounting by screw fixing

The DF 110/10 is fixed to the dock by screw mounting. Surrounding webbing covers the fixing points and protects both the fender and the boat hull.

➡ Matching mounting kits for fixed installation are available as accessories.

Variant logic within the DF series

The DF 110/10 serves as the reference model within the DF series. Other variants differ in length, shape or coverage and can be combined depending on dock layout and protection requirements.

➡ Further versions of the DF series are available for different dock configurations.

Dimensions

 Damper: DF 110/10: approx. 1100 × 100 × 40 mm (length × height × thickness) Mounting plate: approx. 1165 × 165 mm (length × height) 

 Note: For all DF series fenders, the mounting plate is 65 mm larger than the damper in both length and height. 

Colours

black · blue · grey

Origin and quality

seaEQ dock fenders of the DF series are manufactured in Germany. All materials are sourced from Europe and designed for long-term use on docks and pontoons.