Boat Fender DF A 20/10 – Corner Dock Fender & Pontoon Fender

Boat Fender DF A 20/10 – Corner Dock Fender & Pontoon Fender

The seaEQ DF A 20/10 is the corner version within the DF series and a heavy-duty boat fender for critical contact areas. As a corner dock fender and pontoon fender, it is designed to protect dock, pier and pontoon corners where boats are exposed to high lateral loads during docking and manoeuvring. Suitable for both concrete and wooden dock structures.

Controlled Sliding Contact – Dock Fender Performance Around Corners

Even in corner situations, the DF A 20/10 enables the DF series’ characteristic sliding contact. The boat is not abruptly stopped, but guided along the fender surface. This keeps the boat manoeuvrable and leads it safely past the corner – a key advantage when docking in tight spaces at a dock or pontoon. As a robust dock fender, it helps reduce impact forces during contact.

Targeted Protection for Dock & Pontoon Corners

Corners are among the most heavily stressed areas of any dock system. This boat fender (DF A 20/10) protects these zones against impacts, abrasion and damage to the boat hull. It can be installed as a standalone corner solution or combined with straight DF dock fenders to create a continuous line of protection on docks and pontoons.

➡ The DF A 20/10 is part of the DF series and can be combined with straight dock fenders in various lengths.

Robust Construction for Marina Use

The DF A 20/10 consists of a closed-cell polyethylene foam core with a durable synthetic fibre outer jacket. The rear side is made of heavy-duty PVC, prepared for permanent installation on docks, piers and pontoons – ideal wherever a reliable pontoon fender or dock fender is required.

Installation by Screw Fixing

The DF A 20/10 is screw-mounted firmly to the dock corner. Surrounding webbing straps cover the fixing points and protect both the boat hull and the fender surface.

➡ Optional mounting kits are available as accessories for permanent installation.

Dimensions

• Damper: DF A 20/10: approx. 200 / 200 × 100 × 40 mm (leg lengths × height × thickness)
• Mounting plate: approx. 233 / 233 × 165 mm (leg lengths × height)

Note: The mounting plate of the DF series is 65 mm larger than the damper dimensions in both length and height. This also applies to the corner version.

Colours

black · blue · grey

Origin & Quality

seaEQ dock fenders of the DF series are manufactured in Germany. The materials used are sourced from Europe and designed for long-term use on docks and harbour structures.

Frequently Asked Questions (FAQ)

What is the DF A 20/10 used for?

The DF A 20/10 is a heavy-duty boat fender designed as a corner dock fender and pontoon fender for protecting critical dock and pontoon corners.

Where is the DF A 20/10 typically installed?

At dock, pier and pontoon corners where boats experience high lateral forces during docking and manoeuvring.

Is the DF A 20/10 suitable for concrete and wooden docks?

Yes. The corner fender is suitable for use on both concrete and wooden dock structures.

What is meant by “sliding contact” around corners?

The boat is guided along the fender surface instead of being stopped abruptly, helping it remain manoeuvrable while reducing impact loads.

Can it be combined with straight DF dock fenders?

Yes. The DF A 20/10 is part of the DF series and can be combined with straight dock fenders in different lengths.

How is the DF A 20/10 mounted?

It is permanently screw-fixed to the dock corner. Webbing straps cover the fixing points and protect both the hull and the fender surface.

Are mounting kits available?

Yes. Optional mounting kits for permanent installation are available as accessories.

What are the dimensions?

Damper: approx. 200 / 200 × 100 × 40 mm. Mounting plate: approx. 233 / 233 × 165 mm. The mounting plate is 65 mm larger in length and height (also applies to the corner version).

Which colours is it available in?

black, blue, grey