seaEQ PFS Mooring Pile Fender Straps – Set of 3

The seaEQ PFS fastening strap set is designed to secure a seaEQ PF mooring pile fender to round or square mooring piles. Each set contains three fastening straps of the same length – exactly the number required to install one seaEQ PF pile fender.

The straps are wrapped around the mooring pile and the fender, allowing installation without drilling holes or using screws in the pile. The fastening system is suitable for wooden, metal and suitable plastic mooring piles.

The PFS strap set is available in four lengths: PFS 480, PFS 650, PFS 810 and PFS 1020. The correct strap length depends on the seaEQ PF pile fender model as well as the shape and dimensions of the mooring pile.

Three Fastening Straps for One PF Mooring Pile Fender

Three PFS fastening straps are required to secure one seaEQ PF mooring pile fender. Each separately available PFS set therefore contains three straps of the same selected length.

The straps feature a hook-and-loop fastening system. They are manufactured from heavy-duty polypropylene (PP) webbing and sewn with heavy-duty polyester thread.

Features and Benefits

• Set of three fastening straps for one seaEQ PF mooring pile fender
• Three straps per set – sufficient for installing one PF pile fender
• All three straps in each set have the same length
• Suitable for round and square mooring piles
• For wooden, metal and suitable plastic piles
• Installation without drilling or screwing into the pile
• Heavy-duty polypropylene (PP) webbing
• Hook-and-loop fastening system
• Strong seams sewn with heavy-duty polyester thread
• Four available strap lengths: PFS 480, 650, 810 and 1020
• Strap selection according to PF fender model and pile dimensions

Which PFS Fastening Strap Length Do I Need?

The correct PFS strap length depends on the seaEQ PF mooring pile fender model and the diameter of a round pile or the side length of a square pile.

Measure your mooring pile before ordering and use the following selection tables to identify the appropriate PFS fastening strap set.

Selection Table – seaEQ PF 25/80

The following table shows the suitable PFS fastening strap sets for the seaEQ PF 25/80 mooring pile fender.

Selection Table – seaEQ PF 40/80 and PF 40/60

The following strap length recommendations apply to the wider seaEQ PF 40/80 and PF 40/60 mooring pile fenders.

Selection advice: Measure your mooring pile before ordering. Choose the appropriate PFS fastening strap set according to your PF fender model and the measured pile dimensions. Where size ranges overlap, more than one strap length may be suitable.

Materials and Construction

seaEQ PFS fastening straps are manufactured from heavy-duty polypropylene webbing and feature a hook-and-loop fastening system. The seams are sewn with heavy-duty polyester thread.

This textile fastening system allows a seaEQ PF mooring pile fender to be installed without drilling holes or inserting screws into the mooring pile.

What's Included?

3 × seaEQ PFS fastening straps in the selected length.

One set is intended for securing one seaEQ PF mooring pile fender. The pile fender itself is not included in this separately available fastening strap set.

Frequently Asked Questions (FAQ) – seaEQ PFS

1. How many PFS fastening straps are included in one set?

Each seaEQ PFS set contains three fastening straps of the same selected length.

2. Why does the PFS set contain three straps?

Three PFS fastening straps are required to secure one seaEQ PF mooring pile fender to a pile. Each set therefore contains exactly three straps.

3. Which PFS strap lengths are available?

The PFS fastening straps are available in four versions: PFS 480, PFS 650, PFS 810 and PFS 1020.

4. How do I choose the correct strap length?

The correct strap length depends on the PF mooring pile fender model and the shape and dimensions of the pile. Please refer to the appropriate selection table.

5. Are PFS fastening straps suitable for round mooring piles?

Yes. The PFS fastening system can be used on round mooring piles, provided the correct strap length is selected.

6. Can the straps also be used on square mooring piles?

Yes. The straps are also suitable for square mooring piles. The correct length depends on the side length of the pile.

7. Do I need to drill holes into the mooring pile?

No. PFS fastening straps allow installation without drilling holes or using screws in the mooring pile.

8. What materials are the PFS fastening straps made from?

The straps are made from heavy-duty polypropylene webbing with a hook-and-loop fastening system. The seams are sewn with heavy-duty polyester thread.

9. Are PFS fastening straps suitable for wooden and metal piles?

Yes. The system is suitable for wooden, metal and suitable plastic mooring piles.

10. Is the PF mooring pile fender included in the set?

No. This separately available product contains only three PFS fastening straps in the selected length. The seaEQ PF mooring pile fender is not included.