Prices incl. VAT plus shipping costs
Delivery time 1-2 working days (3-5 valid for Europe)
- Article no.: 7022071080
- Product: Schrauben: 7 mal 10*80mm, DIN 571- Edelstahl A4.Scheiben: 7 mal für 10mm Schraube, DIN 7349 - Edelstahl A4.
The seaEQ 10×80 mounting kit for WP dock fenders contains the fastening components required to install one seaEQ WP Wall-Performer on a suitable dock or wall structure.
Each kit includes five 10 × 80 mm hexagon head wood screws complying with DIN 571 and five heavy-duty washers complying with DIN 7349. All components are made from corrosion-resistant A4 stainless steel.
One mounting kit provides the specified fastening components for one seaEQ WP Wall-Performer.
Suitable Fastening Components for seaEQ WP Wall-Performers
The seaEQ 10×80 mounting kit has been assembled specifically for installing seaEQ WP Wall-Performers and is suitable for the following models:
- seaEQ WP 60-50-30
- seaEQ WP 90-50-30
The WP dock fender is secured through the designated mounting points on its upper mounting rail and rear fixing tabs.
The heavy-duty washers complying with DIN 7349 provide a larger bearing surface, helping to distribute the clamping force of the screw heads across a greater area at the mounting points.
A4 Stainless Steel – Corrosion Resistance in Marine Environments
Both the screws and washers are manufactured from A4 stainless steel. This material offers high corrosion resistance and is particularly suitable for fastening applications in marine environments.
A4 stainless steel also provides high resistance in conditions involving regular exposure to moisture and salt-laden air. The specific conditions of use must nevertheless be taken into account.
Installation on Wooden Docks and Timber Structures
The 10 × 80 mm hexagon head wood screws complying with DIN 571 can be used to secure a seaEQ WP Wall-Performer to suitable timber structures.
For installation in wood, we recommend pre-drilling a pilot hole of approximately 7 mm diameter.
The thickness, construction and condition of the existing timber must be suitable for securely supporting the fastening.
Installation on Concrete
For installing a seaEQ WP Wall-Performer on suitable concrete, we recommend using Fischer SX 12 × 80 wall plugs in combination with the 10 × 80 mm screws, subject to the manufacturer's installation specifications.
A 12 mm masonry drill bit is required for these wall plugs.
The drill hole must be prepared in accordance with the wall plug manufacturer's installation instructions and thoroughly cleaned of drilling dust before inserting the wall plug.
Important: Fischer SX 12 × 80 wall plugs are not included in the seaEQ mounting kit and must be purchased separately if required. The suitability of the fixing, including the screw length, mounting component thickness and required anchoring depth, must be checked against the existing substrate and the manufacturer's specifications.
Technical Specifications
| Product | seaEQ 10×80 Mounting Kit for WP Dock Fenders |
| Compatible Models | WP 60-50-30 and WP 90-50-30 |
| Number of Screws | 5 pieces |
| Screw Type | Hexagon head wood screw |
| Screw Dimensions | 10 × 80 mm |
| Screw Standard | DIN 571 |
| Screw Material | A4 stainless steel |
| Number of Washers | 5 pieces |
| Washer Type | Heavy-duty washer complying with DIN 7349 |
| Washer Size | Suitable for 10 mm diameter screws |
| Washer Material | A4 stainless steel |
| Recommended Pilot Hole in Wood | Approx. 7 mm |
| Recommended Wall Plug for Concrete | Fischer SX 12 × 80 (sold separately; suitability to be verified) |
| Drill Diameter for Concrete | 12 mm |
| Drill Hole Depth for Concrete | In accordance with the wall plug manufacturer's instructions |
| Kits Required per WP | 1 kit |
What's Included?
- 5 × A4 stainless steel hexagon head wood screws, 10 × 80 mm, DIN 571
- 5 × A4 stainless steel heavy-duty washers, DIN 7349
One kit contains the specified fastening components for one seaEQ WP Wall-Performer.
Please note: Fischer SX 12 × 80 wall plugs for installation on concrete are not included. The WP dock fender itself is also not included in the mounting kit.
Assembled by seaEQ Germany
The mounting kit is assembled by seaEQ specifically for securing WP Wall-Performers. It contains the specified A4 stainless steel screws and heavy-duty washers in the appropriate quantities for one WP dock fender.
Frequently Asked Questions (FAQ) – seaEQ 10×80 Mounting Kit
1. Which seaEQ dock fenders is the 10×80 mounting kit suitable for?
The mounting kit is designed for the seaEQ WP Wall-Performer models WP 60-50-30 and WP 90-50-30. One kit contains the specified fastening components for one WP dock fender.
2. What is included in the 10×80 mounting kit?
The kit includes five 10 × 80 mm hexagon head wood screws complying with DIN 571 and five heavy-duty washers complying with DIN 7349. All components are made from A4 stainless steel.
3. Why are heavy-duty washers used?
The heavy-duty washers provide a larger bearing surface, distributing the clamping force of the screw heads across a greater area at the WP mounting points.
4. Is the mounting kit suitable for wooden docks?
Yes. The 10 × 80 mm screws can be used to install a seaEQ WP on suitable timber structures. We recommend pre-drilling a pilot hole of approximately 7 mm. The thickness, construction and condition of the timber must be suitable for the fastening.
5. Can the WP also be installed on concrete using this mounting kit?
For suitable concrete, Fischer SX 12 × 80 wall plugs are the recommended fixing option in combination with the 10 × 80 mm screws, provided the combination meets the manufacturer's specifications. The screw length, thickness of the WP mounting components and required anchoring depth must be checked before installation.
6. What drill bit is required for Fischer SX 12 × 80 wall plugs?
A 12 mm masonry drill bit is required. The drill hole must be prepared to the depth specified by the wall plug manufacturer and cleaned of drilling dust before inserting the wall plug.
7. Are Fischer SX 12 × 80 wall plugs included in the kit?
No. The seaEQ 10×80 mounting kit contains five A4 stainless steel screws and five A4 stainless steel heavy-duty washers only. The recommended Fischer SX 12 × 80 wall plugs for concrete installation must be purchased separately.
8. What material are the screws and washers made from?
Both the screws and heavy-duty washers are made from A4 stainless steel. This material offers high corrosion resistance and is particularly suitable for applications in marine environments.
9. Do I need more than one mounting kit for a WP dock fender?
No. One mounting kit contains five screws and five washers and is intended for installing one seaEQ WP Wall-Performer.
