Prices incl. VAT plus shipping costs
Delivery time 1-2 working days (3-5 valid for Europe)
- Article no.: 702205860
- Product: Schrauben: 5 mal 8*60mm, DIN 571- Edelstahl A4.Scheiben: 5 mal für 8mm Schraube, DIN 7349 - Edelstahl A4.
The seaEQ 8×60 mounting kit for MP dock fenders contains the fastening components required to install one seaEQ MP Mooring-Performer on a suitable dock structure.
Each kit includes five 8 × 60 mm hexagon head wood screws complying with DIN 571 and five heavy-duty washers complying with DIN 7349. All components are made from corrosion-resistant A4 stainless steel.
One mounting kit provides the specified fastening components for one seaEQ MP Mooring-Performer.
Suitable Fastening Components for seaEQ MP Mooring-Performers
The seaEQ 8×60 mounting kit has been assembled specifically for installing seaEQ MP Mooring-Performers and is suitable for the following models:
- seaEQ MP 60-20-16
- seaEQ MP 90-20-16
The MP dock fender is secured through the designated mounting points on its rear mounting rail and fixing tabs.
The heavy-duty washers complying with DIN 7349 provide a larger bearing surface, helping to distribute the clamping force of the screw heads across the mounting points.
A4 Stainless Steel – Corrosion Resistance in Marine Environments
Both the screws and washers are manufactured from A4 stainless steel. This material offers high corrosion resistance and is particularly suitable for fastening applications in marine environments.
A4 stainless steel also provides high resistance in conditions involving regular exposure to moisture and salt-laden air. The specific conditions of use must nevertheless be taken into account.
Installation on Wooden Docks and Timber Structures
The 8 × 60 mm hexagon head wood screws complying with DIN 571 can be used to secure a seaEQ MP Mooring-Performer to suitable timber structures.
For installation in wood, we recommend pre-drilling a pilot hole of approximately 5 mm diameter.
The thickness, construction and condition of the existing timber must be suitable for securely supporting the fastening.
Installation on Concrete
For installing a seaEQ MP Mooring-Performer on suitable concrete, we recommend using Fischer DuoPower 10 × 50 wall plugs in combination with the 8 × 60 mm screws.
A 10 mm masonry drill bit is required for these wall plugs.
The drill hole must be prepared in accordance with the wall plug manufacturer's installation instructions and thoroughly cleaned of drilling dust before inserting the plug.
Important: Fischer DuoPower 10 × 50 wall plugs are not included in the seaEQ mounting kit and must be purchased separately if required. The suitability of the fixing must be checked against the existing substrate and the manufacturer's specifications.
Technical Specifications
| Product | seaEQ 8×60 Mounting Kit for MP Dock Fenders |
| Compatible Models | MP 60-20-16 and MP 90-20-16 |
| Number of Screws | 5 pieces |
| Screw Type | Hexagon head wood screw |
| Screw Dimensions | 8 × 60 mm |
| Screw Standard | DIN 571 |
| Screw Material | A4 stainless steel |
| Number of Washers | 5 pieces |
| Washer Type | Heavy-duty washer complying with DIN 7349 |
| Washer Inner Diameter | Approx. 8.4 mm |
| Washer Outer Diameter | Approx. 21 mm |
| Washer Thickness | Approx. 4 mm |
| Washer Material | A4 stainless steel |
| Recommended Pilot Hole in Wood | Approx. 5 mm |
| Recommended Wall Plug for Concrete | Fischer DuoPower 10 × 50 (sold separately) |
| Drill Diameter for Concrete | 10 mm |
| Kits Required per MP | 1 kit |
What's Included?
- 5 × A4 stainless steel hexagon head wood screws, 8 × 60 mm, DIN 571
- 5 × A4 stainless steel heavy-duty washers, DIN 7349
One kit contains the specified fastening components for one seaEQ MP Mooring-Performer.
Please note: Fischer DuoPower 10 × 50 wall plugs for installation on concrete are not included. The MP dock fender itself is also not included in the mounting kit.
Assembled by seaEQ Germany
The mounting kit is assembled by seaEQ specifically for securing MP Mooring-Performers. It contains the specified A4 stainless steel screws and heavy-duty washers in the appropriate quantities for one MP dock fender.
Frequently Asked Questions (FAQ) – seaEQ 8×60 Mounting Kit
1. Which seaEQ dock fenders is the 8×60 mounting kit suitable for?
The mounting kit is designed for the seaEQ MP Mooring-Performer models MP 60-20-16 and MP 90-20-16. One kit contains the fastening components required for one MP dock fender.
2. What is included in the 8×60 mounting kit?
The kit includes five 8 × 60 mm hexagon head wood screws complying with DIN 571 and five heavy-duty washers complying with DIN 7349. All components are made from A4 stainless steel.
3. Why are heavy-duty washers used?
The heavy-duty washers provide a larger bearing surface, distributing the clamping force of the screw heads across a greater area at the MP mounting points.
4. Is the mounting kit suitable for wooden docks?
Yes. The 8 × 60 mm screws can be used to install a seaEQ MP on suitable timber structures. We recommend pre-drilling a pilot hole of approximately 5 mm. The thickness, construction and condition of the timber must be suitable for the fastening.
5. Can the MP also be installed on concrete using this mounting kit?
Yes. For installation on suitable concrete, we recommend Fischer DuoPower 10 × 50 wall plugs in combination with the 8 × 60 mm screws. The suitability of the fixing must be checked in accordance with the manufacturer's instructions and the existing substrate.
6. What drill bit is required for Fischer DuoPower 10 × 50 wall plugs?
A 10 mm masonry drill bit is required. The drill hole must be prepared in accordance with the wall plug manufacturer's installation instructions and cleaned of drilling dust before inserting the plug.
7. Are Fischer DuoPower wall plugs included in the kit?
No. The seaEQ 8×60 mounting kit contains five A4 stainless steel screws and five A4 stainless steel heavy-duty washers only. The recommended Fischer DuoPower 10 × 50 wall plugs for concrete installation must be purchased separately.
8. What material are the screws and washers made from?
Both the screws and heavy-duty washers are made from A4 stainless steel. This material offers high corrosion resistance and is particularly suitable for applications in marine environments.
9. Do I need more than one mounting kit for an MP dock fender?
No. One mounting kit contains five screws and five washers and is intended for installing one seaEQ MP Mooring-Performer.
