seaEQ Wall-Performer WP 90-50-30 – Walk-On Dock and Wall Fender

Large-Format Dock and Wall Fender for Demanding Berths

The seaEQ Wall-Performer WP 90-50-30 is a large-format, permanently mounted dock and wall fender designed for heavily used contact areas along docks, pontoons, landing stages and quay walls.

With dimensions of approximately 900 × 500 × 300 mm, the Wall-Performer provides a large protective surface and substantial projection from the mounting structure. Its multi-layer construction combines a pressure-resistant XPS core with different PE and PPI foam layers.

A distinctive feature is its walk-on construction. This makes the WP suitable for berths where a large fender extends into the walking or working area of the dock.

Large Protective Surface and 300 mm Projection

With a length of approximately 900 mm, a height of approximately 500 mm and a depth of approximately 300 mm, the WP 90-50-30 is designed for contact areas requiring a large protective surface and a substantial fender projection.

The large front surface provides an extensive contact area for the boat hull. At the same time, the 300 mm depth creates a significant distance between the boat and the fixed dock structure.

The Wall-Performer is therefore particularly suitable for docks, landing stages and quay walls with demanding fender requirements.

Pressure-Resistant XPS Core and Multi-Layer Cushioning

The central element of the WP 90-50-30 is a large, pressure-resistant XPS core. This core is combined with different foam layers to create the fender's multi-layer cushioning structure.

• XPS core: approximately 820 × 240 mm
• PE foam on the front: approximately 60 mm
• PE foam on the sides: approximately 30 mm on each side
• PPI foam: approximately 10 mm on the front and top surfaces

The different materials perform specific functions within the fender construction.

The XPS core forms the pressure-resistant structural base. The additional PE and PPI foam layers provide cushioning in the immediate contact areas and complete the multi-layer design of the Wall-Performer.

Walk-On Construction for Dock and Working Areas

The seaEQ Wall-Performer WP 90-50-30 is designed with a walk-on upper surface.

This is particularly beneficial on narrow docks or in working areas where the fender projects into the usable dock space.

The actual load-bearing capacity of the installed Wall-Performer depends significantly on the installation conditions, the supporting structure and the selected fastening system.

For this reason, no general load rating is specified for the complete installed system. Suitability for the intended use must be assessed according to the individual installation conditions.

Heavy-Duty Outer Cover Made from VALMEX® 7311

The outer cover of the WP 90-50-30 is manufactured from VALMEX® 7311, a technical material with a polyester base fabric and an overall weight of approximately 1450 g/m².

This heavy-duty technical fabric forms a robust protective outer layer designed for long-term use in marine berthing environments.

Technical Properties of the Outer Cover

• Material: VALMEX® 7311
• Total weight: 1450 g/m² according to EN ISO 2286-2
• Tensile strength, warp/weft: 3000 / 3000 N/50 mm according to EN ISO 1421/V1
• Tear resistance, warp/weft: 250 / 250 N according to DIN 53363
• Base fabric: PES 1100 dtex, plain weave L 1/1, according to ISO 2076 / ISO 2060
• Adhesion strength: 20 N/cm according to PA 09.03 (internal)
• Flex resistance: 100,000 flex cycles without cracking according to DIN 53359 A
• Temperature resistance: −30 °C to +70 °C according to EN 1876-1 / PA 07.04
• Colour fastness to light: > 6 according to EN ISO 105-B02

Stable PE Backing Plate

On the mounting side, the WP 90-50-30 features a stable backing plate made from polyethylene (PE).

• Dimensions: approximately 890 × 485 mm
• Material thickness: approximately 2 mm
• Material: PE (polyethylene)

The backing plate forms the rear structural base of the fender and supports the broad-area connection between the Wall-Performer and the berth structure.

Permanent Installation on Docks, Pontoons and Quay Walls

The seaEQ Wall-Performer WP 90-50-30 is mounted directly onto a suitable dock, pontoon, landing stage or quay wall structure.

Two integrated mounting elements are provided:

• A pre-drilled mounting rail along the top
• Four fold-out mounting tabs on the rear

These components allow the Wall-Performer to be securely fastened to the respective berth structure using screws or suitable mechanical fasteners.

The choice of screws and other fastening components depends on the supporting material and the requirements of the individual installation.

Mounting hardware is not included in the scope of delivery.

Dimensions, Weight and Colours

• Model: WP 90-50-30
• Dimensions: approximately 900 × 500 × 300 mm (length × height × depth)
• Weight: approximately 8.5 kg
• Construction: XPS core with PE and PPI foam layers
• Outer cover: VALMEX® 7311, approximately 1450 g/m²
• Backing plate: PE, approximately 890 × 485 × 2 mm
• Design: permanently mounted, walk-on construction
• Colours: Dark Grey, Blue and Light Grey

Two Sizes for Different Berthing Requirements

The seaEQ Wall-Performer is available in two sizes:

• WP 90-50-30: approximately 900 × 500 × 300 mm, approximately 8.5 kg
• WP 60-50-30: approximately 600 × 500 × 300 mm, approximately 6.0 kg

Both versions are based on the Wall-Performer concept, combining a pressure-resistant core, multi-layer cushioning and a walk-on construction.

Manufactured by seaEQ Germany

The seaEQ Wall-Performer WP 90-50-30 is manufactured at the seaEQ workshop in Germany.

Frequently Asked Questions About the seaEQ Wall-Performer WP 90-50-30

Where is the WP 90-50-30 used?

The Wall-Performer is permanently installed on docks, pontoons, landing stages and quay walls.

Its large protective surface of approximately 900 × 500 mm and its substantial depth of approximately 300 mm make it particularly suitable for large and heavily used contact areas.

Can you walk on the Wall-Performer?

Yes. The WP 90-50-30 features a walk-on construction. It can therefore also be installed at berths where its upper surface extends into a walking or working area.

The permissible load depends on the installation conditions, the supporting structure and the fastening system. For this reason, no general load rating is specified for the complete installed system.

How is the WP 90-50-30 constructed?

The Wall-Performer combines a pressure-resistant XPS core with several cushioning layers.

The front features approximately 60 mm of PE foam and 10 mm of PPI foam. Each side is equipped with approximately 30 mm of PE foam. The top surface also incorporates a PPI foam layer approximately 10 mm thick.

What is the function of the XPS core?

The large XPS core forms the pressure-resistant structural base of the fender.

It is complemented by PE and PPI foam layers that provide cushioning in the immediate contact areas.

What material is used for the outer cover?

The outer cover is made from VALMEX® 7311 with a polyester base fabric and an overall weight of approximately 1450 g/m².

The material provides a tensile strength of 3000 / 3000 N/50 mm and a colour fastness to light rating of > 6 according to EN ISO 105-B02.

Is the outer cover suitable for permanent outdoor use?

The heavy-duty VALMEX® 7311 outer cover is designed for use in marine environments.

Its technical properties include a tested colour fastness to light rating of > 6 and a specified temperature resistance from −30 °C to +70 °C.

What is the purpose of the backing plate?

The approximately 2 mm thick PE backing plate forms the rear structural base of the fender and supports its broad-area connection to the berth structure.

It measures approximately 890 × 485 mm.

How is the Wall-Performer installed?

The WP features a pre-drilled mounting rail along the top and four fold-out mounting tabs on the rear.

These allow the fender to be mechanically fastened to a suitable dock, pontoon, landing stage or quay wall structure.

Is mounting hardware included?

No. Mounting hardware must be selected according to the supporting material and the specific installation conditions. It is not included in the scope of delivery.

What are the dimensions of the WP 90-50-30?

The Wall-Performer WP 90-50-30 measures approximately 900 × 500 × 300 mm (length × height × depth).

How much does the WP 90-50-30 weigh?

The WP 90-50-30 weighs approximately 8.5 kg.

Which colours are available?

The WP 90-50-30 is available in Dark Grey, Blue and Light Grey.

Is the Wall-Performer available in a smaller version?

Yes. In addition to the WP 90-50-30, the shorter WP 60-50-30 is available with dimensions of approximately 600 × 500 × 300 mm and a weight of approximately 6.0 kg.

Where is the WP 90-50-30 manufactured?

The seaEQ Wall-Performer WP 90-50-30 is manufactured at the seaEQ workshop in Germany.