Flat Boat Fender LF 2100 XL – Extra-Large Hull Protection

2.10 Metres Long and 55 cm High for Extra-Large Contact Areas

The seaEQ Flat Boat Fender LF 2100 XL provides the largest continuous protective surface within the seaEQ LF series. Measuring approximately 2100 × 550 × 30 mm, it protects an exceptionally large section of the boat's hull.

Compared with the standard LF 2100, the XL version offers an additional 150 mm of height while maintaining the same length. This creates a larger vertical protective area, particularly beneficial for boats and yachts with higher freeboard or where contact points may change during berthing.

Extended Hull Protection Instead of Individual Fender Contact Points

Conventional cylindrical or spherical boat fenders protect relatively small sections of the hull. The LF 2100 XL flat boat fender creates a continuous protective zone measuring 2.10 metres in length and 55 cm in height.

Contact forces are distributed over a larger area, helping to reduce concentrated loads on the hull.

The additional height provides greater coverage when the boat's position changes relative to a pontoon, lock wall or another boat moored alongside.

Especially Suitable for Boats and Yachts with Higher Freeboard

With a height of 550 mm, the LF 2100 XL offers significantly greater vertical coverage than the standard LF 2100, which measures 400 mm in height.

This makes it particularly suitable for larger boats and yachts, as well as situations requiring protection over an extensive section of the hull.

Its large protective surface is especially useful when coming alongside, during extended stays at a berth, when passing through locks or when rafting alongside another boat.

Two Functions: Extra-Large Flat Boat Fender and Cushion Fender

The LF 2100 XL can be used along its full length of 2.10 metres as an extra-large flat boat fender.

It can also be folded into a large cushion-style fender for more concentrated contact areas. This provides two different applications: a long, continuous protective zone along the hull or a folded cushion fender for a smaller contact area.

Its flexible construction also makes storage on board easier.

No Inflation Required

The LF 2100 XL is not an inflatable boat fender. Its cushioning core is made of foam and is ready for immediate use.

There is no need to inflate the fender or monitor air pressure. It cannot lose air and can be folded for compact storage when not in use.

Flexible Attachment to the Boat

The LF 2100 XL can be secured according to the boat, its guardrails and the intended application. Depending on the situation, attachment options include ties, straps, ropes or hook-and-loop straps.

seaEQ also offers suitable fender lines and fender lines with metal-free guardrail clips.

These attachment options allow the flat boat fender to be positioned according to the specific berthing situation.

Robust, Hull-Friendly Construction Without Metal Components

No metal components are used in the seaEQ LF 2100 XL. This eliminates hard metallic parts that could damage the hull through movement or contact.

The outer surface is made from high-strength PVC-coated polyester fabric. The material has a tested lightfastness rating of grade ≥ 5 according to DIN EN ISO 105-B02.

The construction is designed for regular use in marine environments.

Integrated Protector Mats

The LF 2100 XL features integrated Protector Mats. These form part of its construction and support the protective performance of the fender in the contact area against the boat's hull.

LF 2100 XL or FPM – What Is the Difference?

The LF 2100 XL is a self-contained, padded boat fender with a foam cushioning core. It performs the fender function itself.

The seaEQ Fender Protection Mat (FPM), on the other hand, is a thin protective mat positioned between an existing fender and the boat's hull.

These products serve different purposes: the LF 2100 XL provides complete fender protection, while the FPM complements an existing fender and protects the hull in the contact area.

Dimensions

Fully extended: approx. 2100 × 550 × 30 mm
(length × height × thickness)

Folded as a cushion fender: approx. 700 × 550 × 90 mm

Colours

Black · Grey · Blue

Manufactured by seaEQ Germany

The seaEQ LF series of flat boat fenders is manufactured in Germany using materials sourced from Europe. Design, material selection and workmanship are focused on reliable performance in marine environments.

Frequently Asked Questions About the seaEQ Flat Boat Fender LF 2100 XL

What is the main advantage of the LF 2100 XL?

With a protective surface measuring approximately 2100 × 550 mm, the LF 2100 XL offers the largest continuous protective area within the seaEQ LF series.

Its combination of 2.10 metres in length and 55 cm in height is particularly beneficial when a large section of the boat's hull needs protection.

What is the difference between the LF 2100 and LF 2100 XL?

Both flat boat fenders are approximately 2.10 metres long and 30 mm thick.

The standard LF 2100 measures 400 mm in height, while the LF 2100 XL measures 550 mm. The XL version therefore offers an additional 150 mm of vertical protection and a correspondingly larger protective surface.

The most suitable version depends on the boat, its freeboard and the berthing situation.

Which boats is the LF 2100 XL suitable for?

The LF 2100 XL is particularly suitable for boats and yachts requiring a large, continuous protective surface along the hull.

Its height of 550 mm makes it especially useful for boats with higher freeboard and situations involving changing contact points.

Can the LF 2100 XL also be used as a cushion fender?

Yes. The LF 2100 XL can be folded and used as a large cushion-style boat fender.

It can therefore be used either as a 2.10-metre-long flat boat fender or folded into a cushion fender for a more concentrated contact area.

Does the LF 2100 XL need to be inflated?

No. The LF 2100 XL has a foam cushioning core and contains no air chamber. It is ready for immediate use and requires neither inflation nor air-pressure checks.

How is the LF 2100 XL attached to the boat?

The attachment method can be selected to suit the individual boat. Options include ties, straps, ropes and hook-and-loop straps.

seaEQ also offers suitable fender lines and fender lines with metal-free guardrail clips.

Is the LF 2100 XL suitable for use in locks?

Yes. Its large, continuous protective surface can be beneficial during lock manoeuvres, as the contact point between the boat and the lock wall may change.

The additional height of 550 mm provides greater vertical coverage than the standard LF 2100.

Is the LF 2100 XL suitable for rafting alongside another boat?

Yes. When boats are moored alongside each other, the LF 2100 XL provides an exceptionally large, continuous protective surface.

This is particularly useful when the relative positions of the boats change due to wind, waves or swell.

Does the LF 2100 XL contain metal components?

No. The seaEQ LF 2100 XL contains no metal components that could come into contact with the boat's hull.

How resistant is the outer material to sunlight?

The outer surface is made from high-strength PVC-coated polyester fabric with a tested lightfastness rating of grade ≥ 5 according to DIN EN ISO 105-B02.

As with other textile materials, prolonged and intensive exposure to sunlight may gradually affect colour intensity.

Which flat boat fender in the LF series is right for my boat?

LF 700: A compact cushion fender for targeted hull protection.

LF 1400: Provides 1.40 metres of continuous hull protection and can be folded into a cushion fender.

LF 2100: Offers a 2.10-metre-long protective zone with a height of 400 mm and can also be folded into a cushion fender.

LF 2100 XL: Provides the same length with a height of 550 mm, offering the largest continuous protective surface in the LF series.

The choice depends on the boat, the desired protective area, freeboard and berthing conditions.