seaEQ Fender Railing Clip FRC-FR – Fender Holder with Line

Quick and Flexible Fender Attachment to Boat Guardrails

The seaEQ Fender Railing Clip FRC-FR combines the seaEQ Fender Railing Clip FRC with a matching, pre-made Fender Line FR. This complete attachment system allows boat fenders to be secured quickly to guardrail wires and positioned at the desired height.

The fender line is made from high-quality, flat specialty polyester (PES) textile material and comes with a pre-formed loop. Together with the FRC, it provides a practical attachment solution for conventional boat fenders and seaEQ fender protection systems.

The system is suitable for guardrail wires up to 8 mm in diameter and contains no metal components.

Fender Railing Clip and Fender Line as a Complete System

The seaEQ FRC-FR combines two components designed to work together.

The pre-formed loop of the Fender Line FR is used to attach the line to the fender. The FRC is positioned on the guardrail wire and allows the fender height to be adjusted quickly.

This makes it easy to change the fender position when mooring conditions vary, without having to tie the line to the guardrail again for every adjustment.

The FRC-FR is designed for guardrail wires with a maximum diameter of 8 mm.

Adjust Fender Height Quickly When Mooring

When approaching a berth or remaining alongside, the position of boat fenders often needs to be adapted to the height of the pontoon, the hull of a neighbouring boat or changing mooring conditions.

With the seaEQ FRC-FR, the fender height can be adjusted quickly and the fender positioned where it is needed.

The system is particularly useful when fenders need to be repositioned or their height adjusted frequently during docking and departure manoeuvres.

Robust Railing Clip and Flat Polyester Fender Line

The seaEQ FRC-FR consists of two matching components:

• Fender Railing Clip FRC: manufactured from heavy-duty, fibre-reinforced flexible PVC, colour Black.
• Fender Line FR: flat specialty polyester (PES) textile rope material supplied by the German manufacturer Seilflechter, colour Orange/Grey.

The fender line is made from flat tubular textile material with a width of approximately 10 mm. It is supplied with a pre-formed loop.

The complete FRC-FR system contains no metal components.

Four Fender Line Lengths for Different Boats

The seaEQ FRC-FR is available with four different fender line lengths:

• FRC-FR60: approx. 60 cm fender line – short version
• FRC-FR90: approx. 90 cm fender line – standard version
• FRC-FR130: approx. 130 cm fender line – long version
• FRC-FR180: approx. 180 cm fender line – XXL version

All stated lengths refer to the total length of the Fender Line FR, including the pre-formed loop.

The appropriate version depends on the boat's freeboard height, the attachment point and the desired fender position.

Versatile Attachment for seaEQ Fender and Protection Systems

The FRC-FR can be used to attach a wide range of suitable boat fenders and is not limited to seaEQ products.

Within the seaEQ range, it is particularly suitable for:

• seaEQ Long Fenders LF: for attachment and quick height adjustment.
• seaEQ Fender Protection Mat FPM: for positioning the protective mat between the boat fender and the hull.
• seaEQ Fender Protection Mat FPM XL: for attaching and positioning the larger protective mat.

A suitable guardrail wire with a maximum diameter of 8 mm is required.

Important: Secure the Fender Line During Extended Mooring

The seaEQ FRC-FR is designed for quick fender attachment, positioning and height adjustment.

During extended mooring periods, the fender line must additionally be secured with two half hitches.

This additional securing step prevents the adjusted fender position from changing unintentionally under prolonged or increased loads.

The Fender Railing Clip does not replace this additional securing requirement.

Technical Specifications

• Product: Fender Railing Clip with pre-made Fender Line
• Clip material: heavy-duty, fibre-reinforced flexible PVC
• Clip colour: Black
• Line material: flat specialty polyester (PES) tubular textile material
• Line material manufacturer: Seilflechter
• Line width: approx. 10 mm
• Line colour: Orange/Grey
• Line lengths: approx. 60, 90, 130 or 180 cm, including the loop
• Suitable guardrail wire diameter: up to 8 mm
• Metal components: none

Manufactured by seaEQ Germany

The seaEQ Fender Railing Clip FRC is manufactured in the seaEQ workshop in Germany.

The Fender Line FR is cut and finished in Germany using high-quality specialty polyester textile material supplied by Seilflechter.

Together, these components form the complete seaEQ FRC-FR fender attachment system.

Frequently Asked Questions About the seaEQ FRC-FR Fender Railing Clip

What is included with the FRC-FR?

The seaEQ FRC-FR includes one Fender Railing Clip FRC and one matching, pre-made Fender Line FR.

The fender line is made from flat specialty polyester (PES) textile material and features a pre-formed loop.

Which guardrail wires are suitable for the FRC-FR?

The seaEQ FRC-FR is suitable for boat guardrail wires with a maximum diameter of 8 mm.

Does the fender line need additional securing during extended mooring?

Yes. During extended mooring periods, the fender line must additionally be secured with two half hitches.

The Fender Railing Clip allows quick fender positioning and height adjustment but does not replace this additional securing requirement.

Which fender line lengths are available?

The FRC-FR is available with four different fender line lengths:

• FRC-FR60 – approx. 60 cm
• FRC-FR90 – approx. 90 cm
• FRC-FR130 – approx. 130 cm
• FRC-FR180 – approx. 180 cm

All lengths refer to the total length of the fender line, including the pre-formed loop.

Can I use the FRC-FR with fenders from other manufacturers?

Yes. The seaEQ FRC-FR can be used with a variety of suitable boat fenders.

It is also compatible with various seaEQ fender and protection products, including the Long Fenders LF and the Fender Protection Mats FPM and FPM XL.

Does the FRC-FR contain any metal components?

No. Both the Fender Railing Clip and the Fender Line are manufactured without metal components.

What is the difference between FR and FRC-FR?

The seaEQ FR is a separately available, pre-made Fender Line with a loop.

The FRC-FR is the complete attachment system combining the Fender Railing Clip FRC with a Fender Line FR for suitable guardrail wires.

Can I adjust the fender height using the FRC-FR?

Yes. The FRC-FR allows the fender height to be adjusted quickly without having to retie the line to the guardrail for every change.

During extended mooring periods, the fender line must additionally be secured with two half hitches.