seaEQ Fender Line FR – Pre-Made Fender Rope with Loop

Easy Fender Attachment and Flexible Positioning

The seaEQ Fender Line FR is a pre-made line designed for attaching and positioning boat fenders. It is suitable for conventional boat fenders as well as seaEQ fender and protection systems.

Made from high-quality, flat specialty polyester (PES) rope material and supplied with a pre-formed loop, the FR offers convenient handling on board.

The fender line is available in four different lengths, allowing you to select the appropriate version for your boat, fender and mooring situation.

Adjust Fender Height Quickly and Easily

The correct position of a boat fender depends on the boat's design, freeboard height and conditions at the mooring berth.

The seaEQ Fender Line FR allows fenders to be positioned at suitable attachment points and their height to be adjusted whenever necessary.

The pre-formed loop makes attachment easier. No additional splicing or custom preparation of the line is required.

Flat Specialty Polyester Rope Material by Seilflechter

For the seaEQ Fender Line FR, we use high-quality specialty polyester (PES) rope material manufactured by the German rope specialist Seilflechter.

Unlike conventional round fender ropes, the FR is made from flat tubular textile material, known in German as a Schutzschlauch, with a width of approximately 10 mm.

This branded rope material is designed for marine applications and combines a robust construction with convenient handling.

• Material: flat specialty polyester (PES) tubular textile rope material
• Rope material manufacturer: Seilflechter
• Line width: approx. 10 mm
• Colour: orange and grey
• Design: pre-made with loop
• Metal components: none

The distinctive orange and grey colour combination also makes the FR an easily recognisable part of the seaEQ accessory range.

Four Lengths for Different Attachment Requirements

The seaEQ Fender Line FR is available in four versions:

• FR 60: approx. 60 cm – short version
• FR 90: approx. 90 cm – standard version
• FR 130: approx. 130 cm – long version
• FR 180: approx. 180 cm – XXL version

All stated lengths refer to the total length of the pre-made fender line, including the loop.

The appropriate length depends on the distance between the attachment point and the desired fender position.

This allows the fender line to be selected according to the boat's design and the specific mooring situation.

Versatile Accessories for seaEQ Fender and Protection Systems

The Fender Line FR can be used with a wide range of suitable boat fenders and is not limited to seaEQ products.

Within the seaEQ product range, it is particularly suitable for attaching and positioning the following products:

• seaEQ Long Fenders LF: for attaching the fenders and adjusting their height.
• seaEQ Fender Protection Mat FPM: for positioning the protective mat between the boat fender and the hull.
• seaEQ Fender Protection Mat FPM XL: for attaching the larger protective mat.

For suitable railing systems, seaEQ also offers the FRC-FR. This separate product combines the seaEQ Fender Railing Clip FRC with a Fender Line FR.

Metal-Free Construction

The seaEQ Fender Line FR contains no metal components.

It therefore complements the metal-free construction concept used in many seaEQ fender and protection products.

Manufactured by seaEQ Germany

The seaEQ Fender Line FR is cut and finished in Germany using high-quality rope material supplied by Seilflechter.

Frequently Asked Questions About the seaEQ Fender Line FR

Which fender line length do I need?

The appropriate length depends on the height of the attachment point, the desired fender position and the specific mooring situation.

The seaEQ Fender Line FR is available in four lengths: FR 60, FR 90, FR 130 and FR 180.

The stated lengths of 60, 90, 130 and 180 cm represent the total length of each pre-made fender line, including the loop.

Can I use the FR with fenders from other manufacturers?

Yes. The seaEQ Fender Line FR can also be used with conventional boat fenders from other manufacturers, provided that suitable attachment points are available.

What is the advantage of the pre-formed loop?

The pre-formed loop makes it easier to attach the fender line to a fender or a suitable attachment point.

No additional splicing or custom preparation of the line is necessary.

What material is the Fender Line FR made from?

The seaEQ Fender Line FR is made from flat specialty polyester (PES) tubular textile rope material supplied by the German manufacturer Seilflechter.

The material is approximately 10 mm wide, and the line comes ready-made with a loop.

Does the Fender Line FR contain any metal parts?

No. The seaEQ Fender Line FR is completely free from metal components.

What is the difference between FR and FRC-FR?

FR refers to the pre-made fender line with loop.

FRC-FR is a separate product combining the seaEQ Fender Railing Clip FRC with a Fender Line FR. It allows attachment to suitable boat railing systems.

Can I use the FR with the seaEQ FPM and FPM XL fender protection mats?

Yes. The Fender Line FR can be used to attach and position the seaEQ Fender Protection Mats FPM and FPM XL.

Both protective mats feature permanently sewn attachment tabs for this purpose.