seaEQ Dock Fender DF 110/10 – Fixed Fender for Docks and Pontoons

Fixed Protective Fender for Docks, Pontoons and Berths

The seaEQ Dock Fender DF 110/10 is a permanently mounted protective fender for docks, pontoons and berths. With a fender length of approximately 1100 mm, it provides a long, continuous protective surface between the boat hull and the edge of the dock.

Unlike a conventional boat fender suspended from the vessel, the DF 110/10 is mounted directly to the dock and remains in position. This means that the protective, cushioning contact surface is already in place whenever a boat approaches the berth.

The DF 110/10 is suitable for private berths as well as marinas and harbour facilities.

Protection During Docking and While Moored

The seaEQ DF 110/10 is suitable for wooden and concrete docks, as well as pontoons.

Its fixed installation creates a defined protective surface along the edge of the berth. The padded fender cushions contact between the boat hull and the dock during docking manoeuvres and when the boat moves while moored.

With its length of approximately 1100 mm, the DF 110/10 provides a continuous contact surface, making it particularly suitable for longer protective sections along the dock edge.

The seaEQ Sliding Contact Principle

A key functional feature of the seaEQ Dock Fender DF 110/10 is its smooth, elongated contact surface.

During sideways contact, the boat hull can slide along the fender surface instead of being stopped immediately by a concentrated point of contact.

This sliding contact principle is particularly beneficial during sideways docking manoeuvres and when the boat moves along the edge of the dock.

The combination of an elongated contact surface and a cushioning core forms the basis of the seaEQ dock fender design.

Robust Construction with Closed-Cell PE Foam

The cushioning core of the DF 110/10 is made from closed-cell polyethylene (PE) foam. Its robust textile outer construction is designed for use at permanent berths.

The backing is made from heavy-duty PVC and provides a stable mounting base for installation on the dock.

Webbing straps running around the fender reinforce the construction and cover the mounting points after installation.

The outer material has been tested for colour fastness to light in accordance with DIN EN ISO 105-B02, achieving a rating of Grade ≥ 5. This rating describes the material's resistance to colour changes caused by light exposure under defined test conditions.

Permanent Installation by Screwing

The seaEQ DF 110/10 is securely mounted directly to the dock using screws.

After installation, the mounting points are concealed by the surrounding webbing straps.

Two optional seaEQ mounting sets are available as accessories for different installation requirements. These mounting sets are not included with the dock fender.

Dimensions of the DF 110/10

• Cushioning element: approx. 1100 × 100 × 40 mm (length × height × thickness)
• Mounting plate: approx. 1165 × 165 mm (length × height)
• Weight: approx. 1.1 kg

For the straight standard models DF 40/10, DF 80/10 and DF 110/10, the mounting plate is 65 mm larger than the cushioning element in both length and height.

The seaEQ DF Series – Different Sizes for Different Berths

The seaEQ DF dock fender series includes several models designed for different installation areas and protection requirements:

• DF 40/10: short version for specific protection areas.
• DF 80/10: medium-length version for longer contact areas.
• DF 110/10: long standard version providing a continuous protective surface.
• DF A 20/10: 90° corner fender for dock corners.
• DF B 110/20: reinforced version with a larger cushioning cross-section.
• DF M 110/50: large-area mat-style protective fender.

The different models can be selected and combined according to the geometry and protection requirements of the berth.

Colours and Maintenance

The seaEQ Dock Fender DF 110/10 is available in three colours:

• Black
• Blue
• Grey

The dock fender can be easily washed with water. If necessary, it can also be cleaned using a pressure washer, maintaining an appropriate distance from the surface.

After many years of exposure to weather and sunlight, the colour intensity of the outer material may decrease. This does not affect the function of the dock fender.

Technical Specifications

• Product: seaEQ Dock Fender DF 110/10
• Application: docks, pontoons and berths
• Suitable dock materials: wood and concrete
• Cushioning element dimensions: approx. 1100 × 100 × 40 mm
• Mounting plate dimensions: approx. 1165 × 165 mm
• Weight: approx. 1.1 kg
• Cushioning core: closed-cell PE foam
• Backing: heavy-duty PVC
• Outer construction: robust textile material with surrounding webbing straps
• Colour fastness to light: DIN EN ISO 105-B02, Grade ≥ 5
• Installation: permanent screw mounting to the dock
• Mounting sets: two optional versions available separately
• Colours: Black, Blue, Grey

Manufactured by seaEQ Germany

The seaEQ DF series dock fenders are manufactured in the seaEQ workshop in Germany.

The materials used are sourced from Europe.

Frequently Asked Questions About the seaEQ Dock Fender DF 110/10

Is the DF 110/10 a dock fender or a boat fender?

The DF 110/10 is a dock fender that is permanently mounted to a dock or pontoon.

Unlike a conventional boat fender, it is not suspended from the boat. Instead, it provides a protective and cushioning contact surface between the boat hull and the edge of the berth.

Which types of berths are suitable for the DF 110/10?

The DF 110/10 is suitable for wooden and concrete docks as well as pontoons.

With a fender length of approximately 1100 mm, it provides a long, continuous protective surface along the dock edge.

What is the seaEQ sliding contact principle?

During sideways contact, the boat hull can slide along the smooth fender surface instead of being stopped immediately by a concentrated point of contact.

This is particularly beneficial during sideways docking manoeuvres and when the boat moves along the dock edge.

How is the DF 110/10 installed?

The dock fender is securely screwed directly to the dock.

After installation, the surrounding webbing straps conceal the mounting points.

Are mounting sets included?

No. Two suitable seaEQ mounting sets are available separately as optional accessories for different installation requirements.

What are the dimensions and weight of the DF 110/10?

The cushioning element measures approximately 1100 × 100 × 40 mm (length × height × thickness).

The mounting plate measures approximately 1165 × 165 mm (length × height).

The weight is approximately 1.1 kg.

How resistant is the outer material to sunlight?

The outer material has been tested for colour fastness to light according to DIN EN ISO 105-B02, achieving Grade ≥ 5.

After many years of intensive sunlight exposure, the colour intensity may still decrease. This does not affect the function or protective performance of the dock fender.

How can I clean the dock fender?

The seaEQ DF 110/10 can be washed with water and, if necessary, cleaned using a pressure washer while maintaining an appropriate distance from the surface.

Which DF model should I choose?

The DF 40/10 is suitable for short, specific protection areas. The DF 80/10 provides a medium-length protective surface, while the DF 110/10 offers a longer, continuous contact area.

For dock corners, larger cushioning cross-sections or particularly large protective surfaces, seaEQ also offers the DF A, DF B and DF M models.

Which colours are available?

The seaEQ DF 110/10 is available in Black, Blue and Grey.