seaEQ PHS 600 – Mooring Line Holder & Boat Line Holder for Pilings

The seaEQ PHS 600 mooring line holder keeps your mooring line within easy reach at the piling, making docking and departure manoeuvres easier. The complete system includes a tensioning strap and one piling hook.

When leaving the berth, simply place the mooring line in the hook. When returning, the line can be picked up directly from the piling. This practical boat line holder makes handling mooring lines easier, especially when sailing single-handed or manoeuvring with a small crew.

Keep your mooring line within easy reach

The seaEQ PHS was developed to prevent mooring lines from falling into the water or hanging down from the piling after departure. Instead, the lines remain ready to be picked up during the next docking manoeuvre.

The piling hook is positioned on the tensioning strap. When leaving the berth, the mooring line is placed in the hook. On returning, it can be conveniently picked up directly from the piling.

The PHS 600 is particularly suitable for permanent berths where the same mooring lines are used regularly.

Dock line holder – Installation without drilling or screws

The PHS 600 is secured to the piling using a tensioning strap. No drilling, screws or permanent modifications to the piling are required.

This makes the system suitable for rented berths and marina facilities where permanent attachments to pilings are not permitted or desired.

The strap-mounted mooring line holder can be removed when necessary and reused on another suitable piling.

Piling hook with a covered aluminium core

The seaEQ piling hook features an aluminium core enclosed in a polypropylene (PP) sleeve. This prevents the mooring line from resting directly against a metal surface.

The hook can be positioned along the tensioning strap. Additional seaEQ PH hooks can be fitted to the system if required.

PHS 600 for round and square pilings

The seaEQ PHS 600 mooring line holder is designed for round and square pilings of the following dimensions.

Round pilings:
Diameter approx. 135–165 mm

Square pilings:
Side length approx. 100–130 mm

Features

– Mooring line holder for keeping a mooring line within easy reach
– Complete system with tensioning strap and one piling hook
– Makes docking and departure manoeuvres easier
– Particularly practical for single-handed sailing and small crews
– Installation without drilling or screws
– Suitable for round and square pilings
– Removable and reusable
– Adjustable hook position along the strap
– Aluminium core inside the hook
– Hook enclosed in a PP sleeve
– Expandable with additional seaEQ PH hooks
– For round pilings with a diameter of approx. 135–165 mm
– For square pilings with side lengths of approx. 100–130 mm

Scope of delivery

1 × seaEQ PHS 600 tensioning strap system
1 × seaEQ piling hook

Important: The PHS 600 is designed exclusively to keep mooring lines ready for use. It is not a mooring point and must not be used to secure a boat or withstand the pulling forces of a moored vessel.

Manufactured by seaEQ Germany

The seaEQ PHS is manufactured and assembled in Germany.

Frequently Asked Questions (FAQ) about the seaEQ PHS 600 Mooring Line Holder

What is the seaEQ PHS 600 used for?

The PHS 600 keeps a mooring line within easy reach at the piling. When leaving the berth, the line is placed in the hook and can be picked up directly when returning.

How does the boat line holder work?

The boat line holder is attached to the piling using a tensioning strap. When leaving the berth, the mooring line is placed in the hook. On returning, the line remains accessible at the piling and can be picked up again.

Does the PHS 600 need to be screwed to the piling?

No. The PHS 600 is attached using a tensioning strap. No drilling, screws or permanent modifications to the piling are required.

Which round pilings are suitable for the PHS 600?

The PHS 600 is designed for round pilings with a diameter of approximately 135 to 165 mm.

Which square pilings are suitable for the PHS 600?

For square pilings, the PHS 600 is designed for side lengths of approximately 100 to 130 mm.

Can I secure my boat directly to the PHS 600?

No. The PHS 600 is intended exclusively to keep a mooring line ready for use. It is not a mooring point and must not be used to withstand the pulling forces of a moored boat.

What material is the piling hook made from?

The hook has an aluminium core enclosed in a polypropylene (PP) sleeve. This prevents the mooring line from coming into direct contact with the metal core.

Can the PHS 600 dock line holder be removed and reused?

Yes. As the system is secured with a tensioning strap rather than screws, it can be removed and reused on another suitable piling.

Can additional hooks be attached to the PHS 600?

Yes. Additional seaEQ PH hooks can be fitted to the system, providing further positions for holding mooring lines.

Is a piling hook included in the delivery?

Yes. The PHS 600 is supplied as a complete set consisting of the tensioning strap system and one seaEQ piling hook.