seaEQ DF Dock Fender Mounting Kit – A4 Stainless Steel Screws 5 × 25 mm

The seaEQ mounting kit for DF dock fenders contains the fastening components required to secure seaEQ DF dock fenders to a suitable dock structure. Each kit includes eight Torx screws and eight washers, all manufactured from corrosion-resistant A4 stainless steel.

Depending on the DF model, one or two mounting kits are required for a complete installation. The kit is sold separately and is intended for all models in the seaEQ DF range.

Suitable Fastening Components for the seaEQ DF Range

seaEQ DF dock fenders are secured to the existing dock structure through the designated mounting points in their rear backing plates.

The mounting kit is suitable for the following models:

• seaEQ DF 40/10
• seaEQ DF 80/10
• seaEQ DF 110/10
• seaEQ DF A 20/10 – Corner Fender
• seaEQ DF B 110/20 – Bow Protection Fender
• seaEQ DF M 110/50 – Protective Mat

Installation must be carried out in accordance with the seaEQ installation instructions for the DF range. The characteristics of the respective dock structure must also be taken into account.

A4 Stainless Steel – Corrosion Resistance in Marine Environments

Both the screws and washers are made from A4 stainless steel. This material offers high corrosion resistance and is particularly suitable for applications in damp and salt-laden environments.

The screws feature a Torx TX 25 drive. The washers help distribute the clamping force across the designated mounting points of the backing plate.

How Many Mounting Kits Are Required?

The number of mounting kits required depends on the seaEQ DF model.

Important: Two mounting kits must be ordered for the DF 110/10, DF B 110/20 and DF M 110/50 models.

Technical Specifications

What's Included?

• 8 × A4 stainless steel screws, 5.0 × 25 mm, Torx TX 25
• 8 × A4 stainless steel washers, 6.4 mm inner diameter

Please note: The quantities listed refer to one mounting kit. Depending on the DF model, one or two kits are required. The DF dock fender itself is not included in this mounting kit.

Assembled by seaEQ Germany

The mounting kit is assembled by seaEQ specifically for installing DF dock fenders. Each kit contains the specified screws and washers in the appropriate quantities.

Frequently Asked Questions (FAQ) – seaEQ DF Mounting Kit

1. Which seaEQ dock fenders is the mounting kit suitable for?

The mounting kit is intended for all models in the seaEQ DF range: DF 40/10, DF 80/10, DF 110/10, DF A 20/10, DF B 110/20 and DF M 110/50.

2. How many screws and washers are included in one kit?

Each kit contains eight A4 stainless steel screws measuring 5.0 × 25 mm with a Torx TX 25 drive, together with eight A4 stainless steel washers.

3. How many mounting kits do I need for my DF dock fender?

One mounting kit is required for the DF 40/10, DF 80/10 and DF A 20/10. Two kits are required for the DF 110/10, DF B 110/20 and DF M 110/50.

4. What material are the screws and washers made from?

Both components are made from corrosion-resistant A4 stainless steel, which is particularly suitable for many applications in marine environments.

5. What are the screw dimensions?

The screws have a diameter of 5.0 mm and a length of 25 mm.

6. What type of drive do the screws have?

The screws feature a Torx TX 25 drive. A suitable TX 25 tool is required for installation.

7. What are the washer dimensions?

The washers are made from A4 stainless steel and have an inner diameter of 6.4 mm.

8. How is the DF dock fender installed?

The DF dock fender is screwed to the dock structure through the designated mounting points in its rear backing plate. Installation must follow the seaEQ instructions for the DF range.

9. Are the screws suitable for use in salt-laden environments?

A4 stainless steel offers high corrosion resistance and is suitable for many applications in marine environments. As with all stainless steel fasteners, the specific conditions of use must be considered.

10. Is the mounting kit included when purchasing a DF dock fender?

The mounting kit is sold separately. Depending on the DF model, one or two kits are required. The DF dock fender itself is not included in this mounting kit.